Millat Tractor MF 385 4WD

You are here:

Home
Millat Tractor MF 385 4WD

EDGE OVER 2WD
Traction (30% More)
Drawbar Power (16% More)
Drawbar Pull (34% More)
Tyre Wear (15% less)
Fuel Efficiency (15% More)
Field Work Speed (13-20% More)

Technical Specifications

PERFORMANCE
Maximum engine power @ 2,200 rpm/min	85 hp*
Maximum torgue @ 1,600 rpm	291 Nm
Maximum PTO power at rated engine speed	70 hp**
* Certified to BS AU 141a
** Manufacturer’s estimate

ENGINE
Make /Type	Perkins / 4.41
No. of cylinders	4
Injuction	Direct
Bore	101 mm
Stroke	127 mm
Capacity	4.1 litre
Aspiration	Natural
Compression ratio	15.3:1
Starting aid	Thermostar
Throttle Control	Hand and foot
Cooling	Water
Air Cleaner Type	Oil bath
Air Pre-Cleaner	Over bonnet, Air swirl
Fuel filter	Daul, High capacity with sedimentor
Exaust	Vertical Muffler under bonet
Oil Cooler	Water Cooler

ELECTRICS
Voltage	12V, negative earth
Battery	96 Ah
Starter	2.8 kW
Alternator	45 Amp.

CLUTCH
Type	Dual
Diameter	305×254 mm
Lining Material	Cerametallic

TRANSMISSION
Type	Sliding spur
Number of gears	8 forward, 2 reverse
Road speed at 2,200 engine rpm with 18.4/15-30 rear tyres	.
Gear Speed	(kph)
Forward 1	2.7
Forward 2	3.7
Forward 3	5.1
Forward 4	6.8
Forward 5	10.4
Forward 6	15.2
Forward 7	20.8
Forward 8	27.9
Reverse 1	3.5
Reverse 2	14.1

POWER TAKE OFF
Type	Live
Engine speed @ 540 PTO rpm	1,789 rpm
Shaft diameter	35 mm
No. of splines	6

HYDRAULICS
Functions	Draft Control, Position Control, Response Control, Constant Pumping
Pump Type	4-Piston Ferguson Pump
Maximum Oil Flow	16.7 litre/min
Maximum Pressure	21 MPa at normal operating temperature
Max. lift capacity with lower links	2,145 kg
Horizontal lower links	Cat. I & II with interchangeable balls

4WD FRONT AXLE
Axle Type	Parallel drive
Engagement	Machenical

STEERING
Steering	Hydrostatic

REAR AXLE AND BRAKES
Axle Type	Straddle with epicyclic reduction
Brake Type	Oil immersed, multi-disc
Braking Area	1,774 sq.cm.
Brakes Actuation	Hydraulic
Parking Brake	Hand lever operated

INSTRUMENTATION
Gauges	Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature
Warming lights	Direction indicators, Electric charge, Headlight main beam Low engine oil pressure 4WD indication light

TYRES
Front	12.4-24 (6PR)
Rear	18.4/15-30 (6PR)

TRACK ADJUSTMENT
Front axle	1,376-1,944 mm
Rear axle	1,423-2,134 mm

WEIGHT AND DIMENSIONS
Weight (with full fuel, oil and water))	.
Weight front	1,429 kg
Weight rear	1,582 kg
Gross Weight	3,011 kg

Dimensions	.
Wheel base	2,350 mm
Overall length	3,810 mm
Width minimum	1,871 mm

Height	.
Over Exhaust	2,485 mm
Over Steering Wheel	1,781 mm

Turning Circle	.
Without brakes	8,518 mm
Ground Clearance Under 4WD front axle	395 mm
Ground Clearance Under gear box	501 mm

CAPACITIES
Fuel Tank	108.0 L
Engine sump	7.5 L
Cooling system	15.2 L
Hydraulic system	47.4 L
Power steering reservoir	2 L
4WD front axle differential	5.6 L
Hub each saide	1 L
Oil bath air cleaner	0.7 L

OPERATOR AREA
Seat	Cushioned
Fenders	Flat top
Tool	Standard

STANDARD EQUIPMENT
Chain stabilizers, Weight frame without weights,Standard tool box with set of tools. Top link, Cat – I balls. Check chains, Operator’s manual

OPTIONAL EQUIPMENT
Front end weights, 9 hole draw bar. Sun Canopy.

NOTE:
Millat Products and Specifications are subject to change without prior notice.