ENGINE POWER:
Fly wheel 85 HPOPERATING WEIGHT:
With 7.50 – 16 and 16.9/14 – 30 tyres, hydraulic lift with 3 – point linkage cat. 1 – 2, 30 kg front axle bracket guard, flat top fenders (with out any frame): 2,100Kg.
ENGINE:
- Fiat 8045.05
- 4 – Stroke, Direct Injection Diesel.
- Number of Cylinders: 4
- Bore and Stroke: 104 x 115 mm
- Piston Displacement: 0,908 cu.cm
- Flyweight type dynamic balancer.
- Compression Ratio: 17:1
- Max. Power at 2,600 Rpm: 85HP
- Max. Torque at 1,600 Rpm: 29.70 Kgm
- Dry-type Cylinder Liners.
- Cooling System: Water
- Four-row, steel tube and fin radiator force-feed lubricated system.
- Two power outlets for hydraulic pump on timing cover.
- Distributor-type injection pump with mechanical or hydraulic speed governor.
- Five-bearing crankshaft.
- 12 V Starting System.
- 400 Watt Alternator
- 110/120 Ah battery.
FILTERS:
- Air Filter: Oil-bath with pre-cleaner and automatic dust unloader;
- Fuel Filter: 2 replaceable cartridges;
- Oil Filter: Easy-to-change, full-flow cartridge.
- Exhaust muffler: vertical
- Capacity of fuel tank: 54 Liters
CLUTCH:
- Dual Plate, dry type with separate controls.
- Plate facing of asbestos compound.
- Diameter of plates: 11in
TRANSMISSION:
- Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds.
- Synchromesh on 3rd, 4th, 7th, and 8th speeds.
- Double control lever
- Differential with pedal actuated lock and automatic disconnection.
- Spur gear final drives.
- Gear box mounted starter safety Switch.
BRAKES:
- Service: Dry, band-type, mechanically operated.
- Parking: Manual lever on right side of operator.
FRONT AXLE:
Inverted U Section, telescopic type.
TREADS:
- Front (8 positions):
1,320 – 1,420 – 1,520 – 1,620 – 1,720 – 1,820 – 1,920 – 2,020 mm
- Rear (8 positions):
1,320 – 1,420 – 1,520 – 1,620 – 1,720 – 1,820 – 1,920 – 2,020 mmSTEERING:
- Hydro Static with Independent Circuit, Minimum turning radius:
with brakes: 3,400 mm
without brakes: 3,700mm
DRIVER’S SEAT:
Fully upholstered, with parallelogram suspension; adjustable. |
POWER TAKE-OFF:
- 1 – 3/8″ 6 spline shaft.
- Standard: fully independent 540 rpm at 1,967 engine rpm.
- High-speed PTO* (1 – 3/8″ Shaft) engine speed rpm.
- (*) for application of belt pulley
HYDRAULIC LIFT:
- With draft and position control.
- Draft control through top link.
- Gear type pump driven from engine crankshaft.
- Pump capacity (at 2,400 engine rpm): 26.7 liter / min.
- Relief valve opening pressure: 190 kg/sq.cm.
- Response control.
- 3 – point linkage cat. 1 – 2
- Sway chains and lower link retaining spring.
- Lift lever lock bracket.
- Max. lifting capacity: 2150 kg.
TYRES:
- Front: 7.50 – 16
- Rear: 16.9/14-30
BODY:
- Hood with side-hinged cover for engine inspection.
- Front grill is easily removable for quick access to air cleaner and battery.
INSTRUMENT PANEL:
Separate temperature, fuel gauge & tachometer.
LIGHTING SYSTEM:
- Three-position headlights (parking, low and high beam).
- Blue high beam warning light on instrument panel. (ASAE)
- Adjustable Head lights mounted in front Big Indicator, Hazard & Parking lights
DIMENSIONS:
(with 7.50 – 16 and 16.9/14 – 20 tyres) |
|
mm |
A Wheelbase
B Overall Length
C Height to top of hood
D Height to steering wheel
E Front tread (8 positions)
F Read Tread (8 positions)
G Ground clearance under front axle |
2,070
3,330
1,460
1,610
1,320 + 2,020
1,320 + 2,020
540 |
STANDARD EQUIPMENT:
Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator’s manual
OPTIONAL EQUIPMENT:
- Front End Weights
- PTO Pulley (AGRIPAK Design)
- AGRIPAK Sun Canopy
- 9 Hole Draw Bar
- Pintle/Trolley Hook (AGRIPAK Design)
|
