Fiat 480

• Fiat 8035.06
• 4 – Stroke, 3 Cylinders
• Direct Injection Diesel,
• Max. Power:     2500 rpm 55HP/DIN (41.0 kw)
• Max. Torque:    1500 rpm 185NM (18.88 Kgm)
• Dry Type Cylinder Liner
• Water Cooling
• Bore & Stroke: 100 x 115 mm.
• Piston Displacement:    2,710 cc.
• Compression Ratio:     17:1
• Three row brass tube and copper fin radiator
• Force-feed lubrication system
• Distributor-type injection pump with mechanical speed governor
• Four-Bearing Crankshaft
• 12 Volt Starting System; 4 hp Motor
• 400 Watt Alternator
• 90/95 Ah Battery located in front of radiator
• Gearbox Mounted Starter Safety Switch
• Vertical Exhaust Muffler

OPERATING WEIGHT:
1,710 Kg with 6.00-16 and 12.4/11-28 Tyres, hydraulic lift with three-point linkage cat. 1-2, square type fender with flat top.

TRANSMISSION:

• Gearbox with Constant-Mesh Gears
• Gears: 8 Forward 2 Reverse Speeds
• Synchromesh: 3rd, 4th, 7th, and 8th Speeds
• Differential with Pedal Actuated Lock
• and Automatic Disconnection.
• Single-Reduction Spur Gear Final Drives.

SPEEDS (KPH)

STEERING

• Manual, recirculation ball type
• Centre relay lever
• Joints lubricated for life

DRIVER’S SEAT
Fully upholstered with parallelogram suspension, adjustable to driver’s weight

FRONT AXLE
Telescopic type, inverted U, variable tread

CLUTCH

• Dual Plate, dry type, with separate controls (pedal for transmission and hand lever for PTO)
• Diameter of plates: 11 in.

POWER TAKE-OFF:

• 13/8” – 6 Spline Shaft
• Fully Independent: 540 rpm at
• 2,160 Engine rpm
• High-Speed  PTO* (13/8” shaft)
• Same Speed as Engine.
• * Depends on belt pulley

FILTERS

• Air: oil-bath with precleaner and semiautomatic dust unloader
• Fuel: 2 replaceable cartridges
• Oil: easy-to-change, full-flow cartridge
• Vertical exhaust muffler
• Gearbox mounted starter safety switch

• Front: 6.00-16
• Rear: 12.4/11-28

LIGHTING SYSTEM

• With 3-position headlights; rear position and number plate lights.
• 2-pole power connector (ASAE)
• Blue high beam warning light on dashboard

BRAKES

• Service: dry, band-type with mechanical control
• Parking: with hand lever, on right of operator

THREADS

• Front (8 positions)
  1320 – 1420 – 1520 – 1620 – 1720n – 1820 – 1920 – 2020mm
• Rear (8 positions)
  1200 – 1300 – 1400 – 1500 – 1600 – 1700 – 1800 – 1900mm

DIMENSIONS:

• (With 6.00-16 and 12.4/11-28 tyres)
• Wheelbase:                                     1,920mm
• Overall Length:                                2,960mm
• Height to Top of Hood:                    1,390mm
• Height to Steering Wheel:               1,490mm
• Front Tread (8 positions):   1,320 – 2,020mm
• Rear Tread (8 positions):    1,200 – 1,900mm
• Ground Clearance:   480mm under Front AxleOPTIONALS
  
  ENGINE
• Cold starting aid (Thermostat)
• Radiator screen

TRANSMISSION
Additional creeper speed reduction unit, for a total of 12 forward and 3 reverse speeds

STEERING
Hydrostatic Power, with independent circuit

POWER TAKE-OFF
540 rpm (1 3/8″ – 6 spline shaft)
Proportional ground speed, revolutions per approx. one metre forward travel (independently of gear engaged): 4.05

HYDRAULICS
Auxiliary control valve (right hand) for implement remote control with single or double acting rams

TOWING ATTACHMENTS

• Swinging drawbar Cat A
• Linkage drawbar Cat A-C

BELT PULLEY

• Diameter:  250mm
• Width:  150mm
• Pulley speed:  1350 rpm
• Belt Speed:  17.7 m/sec

OPTIONAL EQUIPMENT:

• Front End Weights with Frame
• PTO Pulley (AGRIPAK Design)
• DTO Pulley
• AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
• 9 Hole Draw Bar
• Pintle/Trolley Hook (AGRIPAK Design)
• DTO Suction Pump
• High Clearance Kit

FUEL TANK
Capacity: 54 liters

HYDRAULIC LIFT

• With draft and position control
• Draft control through top link
• Gear – type pump driven from engine crankshaft
• Pump capacity: 22.7 lit/min
• Relief valve opening pressure: 150-170 kg/sq. cm.
• 3-point linkage Cat. 1-2
• Manual response control
• Lower links with sway restrictors and transverse retaining spring
• Control lever with safety stop
• Max. lifting capacity: 1540 kg