Millat Tractor MF 375

Hydrostatic Power Steering for Comfortable Driving.

• Hydraulically Actuated Oil-Immersed Multi-Disc Brake Systems with Pendant Paddle.
• Robust Straddle Rear Axle with Epicyclic Reduction Unit.
• Heavy-Duty Front Axle & Support.
• Bigger Capacity Fuel Tank.
• Fuel Efficient, 4.248 High Performance Engine.
• Grater Pulling Power.
• Higher P.T.O Power.
• Spring Suspension Deluxe Seat.
• Easy Accessibility to service Point.
• Spacious Operator’s Area

PERFORMANCE
Maximum engine power @ 2,000 rpm/min	75 (B.S) hp
Maximum torque @ 1,400 rpm	290 Nm
Maximum PTO power at rated engine speed	69.5 hp*
PTP Power at 540 rpm	63.0 hp
* Engine certified to BS.AU 141a:(1971)

	ENGINE Make /Type Diesel /4.248 No. of cylinders 4 Injuction Direc Bore 101 m Stroke 127 mm Capacity (litres) 4.07 litre Aspiration Natural Compression ratio 16:1 Starting aid Thermostart Throttle Control Hand and foot Cooling Water Air Cleaner Type Oil bath Air Pre-Cleaner Over bonnet Fuel filter Daul, High capacity Exaust Vertical Muffler under bonnet

Note: This is a premium heavy duty engine with tuffrided crankshat for longer life in adverse conditions.

	ELECTRICS Voltage 12V, Negative earth Battery 110 Ah Starter 2.8 kW Alternator 45 Amp. CLUTCH Type Dual Diameter 305×254 mm Lining Material Cerametallic

	TRANSMISSION Type Sliding spur Number of gears 8 forward, 2 reverse Road speed at 2,000 engine rpm with 16.9/14×30 rear tyres Gear Speed (kph) Forward 1 (first low) 2.3 Forward 2 3.4 Forward 3 4.7 Forward 4 6.3 Forward 5 (first high) 9.3 Forward 6 13.6 Forward 7 18.6 Forward 8 25.0 Reverse 1 (low) 3.2 Reverse 2 (high) 12.7

	POWER TAKE OFF Type Live Engine speed @ 540 PTO rpm 1,789 rpm Shaft diameter 35 mm No. of splines 6

	HYDRAULIC Functions Draft Control, Position Control, Response Control, Constant Pumping Pump Type Reciprocating Ferguson Pump Maximum Oil Flow 21.2 MPa at normal operating temperature Max. lift capacity with lower links horizonta 2,145 kg Cat. I & II with interchangeable balls

	STEERING Steering Hydrostaticm

FRONT AXLE
Type	Heavy Duty Box Section, Adjustable
REAR AXLE AND BRAKES
Axle Type	Straddle with epicyclic reduction Unit
Brake Type	Oil immersed, multi-disc
Brake Padal	Pendant
Brake Padal	Pendant
Braking Area	1,774 sq.cm
Brakes Actuation	Hydrauli
Parking Brakes	Hand lever operated
INSTRUMENTATION
Gauges	Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature
Warming lights	Direction indicators, Battery charge, Headlight main beam Low engine oil pressure Brake lights & Auxiliary socket
TYRES
Front	7.50-16 (6 PR)
Rear	16.9/14-30 (6 PR)

	TRACK ADJUSTMENT Front axle 1,271 – 1,881 mm Rear axle 1,423-2,134 mm

	WEIGHT AND DIMENSIONS (Approximately) Weight Gross Weight 2,355 kg Dimensions Wheel base 2,170 mm Overall length 3,670 mm Overall Width 1,970 mm Height Over Exhaust 2,485 mm Over Steering Wheel 1,730 mm Turning Circle With brakes 7,260 mm Without brakes 8,095 mm Ground clearance (under gear box) 465 mm

CAPACITIES Fuel Tank 108.0 L Engine sump 7.5 L Cooling system 15.2 L Hydraulic system 36 L Steering box 0.7 L Oil bath air cleaner 0.7 L Brake Oil 0.25 L STANDARD EQUIPMENT Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I, Cat I & II balls. Check Chains, Stabiliser Chains, Spring suspension seat, Flat top fenders & Operator’s manual OPTIONAL EQUIPMENT Front end weights, Swinging drawbar, Sun Conopy, Pintle Hook and 9 hole drawbar NOTE: Millat Tractors Ltd. reserve the right to change specifications without prior notice.