•   Call Us: +92-21-35053243 , +92-21-35053244
  •   usamaniazi@hotmail.com, sales@usamaharris.com

Fiat 640

Specifications

ENGINE POWER:
Fly wheel 85 HP

OPERATING WEIGHT:
With 7.50 - 16 and 16.9/14 - 30 tyres, hydraulic lift with 3 - point linkage cat. 1 - 2, 30 kg front axle bracket guard, flat top fenders (with out any frame):  2,100Kg.

ENGINE:

  • Fiat 8045.05
  • 4 - Stroke, Direct Injection Diesel.
  • Number of Cylinders: 4
  • Bore and Stroke: 104 x 115 mm
  • Piston Displacement: 0,908 cu.cm
  • Flyweight type dynamic balancer.
  • Compression Ratio: 17:1
  • Max. Power at 2,600 Rpm: 85HP
  • Max. Torque at 1,600 Rpm: 29.70 Kgm
  • Dry-type Cylinder Liners.
  • Cooling System: Water
  • Four-row, steel tube and fin radiator force-feed lubricated system.
  • Two power outlets for hydraulic pump on timing cover.
  • Distributor-type injection pump with mechanical or hydraulic speed governor.
  • Five-bearing crankshaft.
  • 12 V Starting System.
  • 400 Watt Alternator
  • 110/120 Ah battery.

FILTERS:

  1. Air Filter: Oil-bath with pre-cleaner and automatic dust unloader;
  2. Fuel Filter: 2 replaceable cartridges;
  3. Oil Filter: Easy-to-change, full-flow cartridge.
  4. Exhaust muffler: vertical
  5. Capacity of fuel tank:  54 Liters

CLUTCH:

  • Dual Plate, dry type with separate controls.
  • Plate facing of asbestos compound.
  • Diameter of plates: 11in

TRANSMISSION:

  • Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds.
  • Synchromesh on 3rd, 4th, 7th, and 8th speeds.
  • Double control lever
  • Differential with pedal actuated lock and automatic disconnection.
  • Spur gear final drives.
  • Gear box mounted starter safety Switch.

BRAKES:

  • Service: Dry, band-type, mechanically operated.
  • Parking: Manual lever on right side of operator.

FRONT AXLE:
Inverted U Section, telescopic type.

TREADS:

  • Front (8 positions):
    1,320 - 1,420 - 1,520 - 1,620 - 1,720 - 1,820 - 1,920 - 2,020 mm
  • Rear (8 positions):
    1,320 - 1,420 - 1,520 - 1,620 - 1,720 - 1,820 - 1,920 - 2,020 mm
     
    STEERING:

 

  • Hydro Static with Independent Circuit, Minimum turning radius:
    with brakes: 3,400 mm
    without brakes: 3,700mm

DRIVER'S SEAT:

Fully upholstered, with parallelogram suspension; adjustable.

POWER TAKE-OFF:

  • 1 - 3/8" 6 spline shaft.
  • Standard: fully independent 540 rpm at 1,967 engine rpm.
  • High-speed PTO* (1 - 3/8" Shaft) engine speed rpm.
  • (*) for application of belt pulley

HYDRAULIC LIFT:

  • With draft and position control.
  • Draft control through top link.
  • Gear type pump driven from engine crankshaft.
  • Pump capacity (at 2,400 engine rpm): 26.7 liter / min.
  • Relief valve opening pressure: 190 kg/sq.cm.
  • Response control.
  • 3 - point linkage cat. 1 - 2
  • Sway chains and lower link retaining spring.
  • Lift lever lock bracket.
  • Max. lifting capacity: 2150 kg.

TYRES:

  • Front: 7.50 - 16
  • Rear: 16.9/14-30

BODY:

  • Hood with side-hinged cover for engine inspection.
  • Front grill is easily removable for quick access to air cleaner and battery.

INSTRUMENT PANEL:
Separate temperature, fuel gauge & tachometer.

LIGHTING SYSTEM:

  • Three-position headlights (parking, low and high beam).
  • Blue high beam warning light on instrument panel. (ASAE)
  • Adjustable Head lights mounted in front Big Indicator, Hazard & Parking lights
DIMENSIONS:
(with 7.50 - 16 and 16.9/14 - 20 tyres)
  mm
A  Wheelbase
B   Overall Length
C   Height to top of hood
D   Height to steering wheel
E   Front tread (8 positions)
F   Read Tread (8 positions)
G   Ground clearance under front axle
2,070
3,330
1,460
1,610
1,320 + 2,020
1,320 + 2,020
540

STANDARD EQUIPMENT:
Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator's manual 

OPTIONAL EQUIPMENT:

  • Front End Weights
  • PTO Pulley (AGRIPAK Design)
  • AGRIPAK Sun Canopy
  • 9 Hole Draw Bar
  • Pintle/Trolley Hook (AGRIPAK Design)