•   Call Us: +92-21-35053243 , +92-21-35053244
  •   usamaniazi@hotmail.com, sales@usamaharris.com

Fiat 480

Specifications

ENGINE POWER:
At flywheel 55 HP/DIN

ENGINE:

  • Fiat 8035.06
  • 4 - Stroke, 3 Cylinders
  • Direct Injection Diesel,
  • Max. Power:     2500 rpm 55HP/DIN (41.0 kw)
  • Max. Torque:    1500 rpm 185NM (18.88 Kgm)
  • Dry Type Cylinder Liner
  • Water Cooling
  • Bore & Stroke: 100 x 115 mm.
  • Piston Displacement:    2,710 cc.
  • Compression Ratio:     17:1
  • Three row brass tube and copper fin radiator
  • Force-feed lubrication system
  • Distributor-type injection pump with mechanical speed governor
  • Four-Bearing Crankshaft
  • 12 Volt Starting System; 4 hp Motor
  • 400 Watt Alternator
  • 90/95 Ah Battery located in front of radiator
  • Gearbox Mounted Starter Safety Switch
  • Vertical Exhaust Muffler

OPERATING WEIGHT:
1,710 Kg with 6.00-16 and 12.4/11-28 Tyres, hydraulic lift with three-point linkage cat. 1-2, square type fender with flat top.

TRANSMISSION:

  • Gearbox with Constant-Mesh Gears
  • Gears: 8 Forward 2 Reverse Speeds
  • Synchromesh: 3rd, 4th, 7th, and 8th Speeds
  • Differential with Pedal Actuated Lock 
  • and Automatic Disconnection.
  • Single-Reduction Spur Gear Final Drives.

SPEEDS (KPH)

With Tyres
Engine speed (rpm)
PTO Speed (rpm)
Forward
first
second
third
fourth
fifth
sixth
seventh
eight
Reverse
first
second


2160
540

1.87
2.82
4.13
5.33
6.75
10.15
14.86
19.20

2.69
9.70

12.4/11-28
2500
625

2.17
3.26
4.78
6.17
7.81
11.75
17.20
22.22

3.11
11.22

STEERING

  • Manual, recirculation ball type
  • Centre relay lever
  • Joints lubricated for life

DRIVER'S SEAT
Fully upholstered with parallelogram suspension, adjustable to driver's weight

FRONT AXLE
Telescopic type, inverted U, variable tread

CLUTCH

  • Dual Plate, dry type, with separate controls (pedal for transmission and hand lever for PTO)
  • Diameter of plates: 11 in.

POWER TAKE-OFF:

  • 13/8” – 6 Spline Shaft
  • Fully Independent: 540 rpm at 
  • 2,160 Engine rpm
  • High-Speed  PTO* (13/8” shaft)
  • Same Speed as Engine.
  • * Depends on belt pulley

FILTERS

  • Air: oil-bath with precleaner and semiautomatic dust unloader
  • Fuel: 2 replaceable cartridges
  • Oil: easy-to-change, full-flow cartridge
  • Vertical exhaust muffler
  • Gearbox mounted starter safety switch

TYRES

  • Front: 6.00-16
  • Rear: 12.4/11-28

LIGHTING SYSTEM

  • With 3-position headlights; rear position and number plate lights.
  • 2-pole power connector (ASAE)
  • Blue high beam warning light on dashboard

BRAKES

  • Service: dry, band-type with mechanical control
  • Parking: with hand lever, on right of operator

THREADS

  • Front (8 positions)
    1320 - 1420 - 1520 - 1620 - 1720n - 1820 - 1920 - 2020mm
  • Rear (8 positions)
    1200 - 1300 - 1400 - 1500 - 1600 - 1700 - 1800 - 1900mm

DIMENSIONS:

  • (With 6.00-16 and 12.4/11-28 tyres)
  • Wheelbase:                                     1,920mm
  • Overall Length:                                2,960mm
  • Height to Top of Hood:                    1,390mm
  • Height to Steering Wheel:               1,490mm
  • Front Tread (8 positions):   1,320 – 2,020mm
  • Rear Tread (8 positions):    1,200 – 1,900mm
  • Ground Clearance:   480mm under Front Axle

    OPTIONALS

    ENGINE
  • Cold starting aid (Thermostat)
  • Radiator screen

TRANSMISSION
Additional creeper speed reduction unit, for a total of 12 forward and 3 reverse speeds

STEERING
Hydrostatic Power, with independent circuit

POWER TAKE-OFF
540 rpm (1 3/8" - 6 spline shaft)
Proportional ground speed, revolutions per approx. one metre forward travel (independently of gear engaged): 4.05

HYDRAULICS
Auxiliary control valve (right hand) for implement remote control with single or double acting rams

TOWING ATTACHMENTS

  • Swinging drawbar Cat A
  • Linkage drawbar Cat A-C

BELT PULLEY

  • Diameter:  250mm
  • Width:  150mm
  • Pulley speed:  1350 rpm
  • Belt Speed:  17.7 m/sec

OPTIONAL EQUIPMENT:

  • Front End Weights with Frame
  • PTO Pulley (AGRIPAK Design)
  • DTO Pulley
  • AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
  • 9 Hole Draw Bar
  • Pintle/Trolley Hook (AGRIPAK Design)
  • DTO Suction Pump
  • High Clearance Kit

FUEL TANK
Capacity: 54 liters

HYDRAULIC LIFT

  • With draft and position control
  • Draft control through top link
  • Gear - type pump driven from engine crankshaft
  • Pump capacity: 22.7 lit/min
  • Relief valve opening pressure: 150-170 kg/sq. cm.
  • 3-point linkage Cat. 1-2
  • Manual response control
  • Lower links with sway restrictors and transverse retaining spring
  • Control lever with safety stop
  • Max. lifting capacity: 1540 kg